Charge the sensors To charge the AsMos sensor, you can use the USB cable if you need to charge only one sensor at the time. Or you can charge multiple sensors at the same time using a docking station. Below we will explain how to charge one sensor with the USB cable.To know how to […]
How to charge an AdMos sensor Read More »
Data Synchronization Note : Once the synchronization is done, the datas are automatically deleted from the sensors. So be sure you have saved the data on the provide USB Key as mentioned below. Connect all your sensors to the docking station before powering it up. Power up the docking station. Wait until the docking boots
Sync and Charge AdMos sensors with Docking Station Read More »
Automatic update over the air AdMosLive sensors are automatically updated over the air (OTA) by Insiders. Therefore, you do not need to do anything, just use the sensors as usual. While using AdMosLive sensors for a sport session, the OTA update process will start automatically if needed. Then, the sensors will have the latest version
How to Update an AdMosLive sensor V1 Read More »
LED lights table The below table explain in detail the meaning of both LED lights colours and status. LED light colour Blinking speed Device status Slow Synchronising with GPS signal and measuring heart rate with the Wiz Shirt Fast Synchronised and ready to use with the Wiz Shirt Slow The sensor is charging Steady ON
LED lights behaviour on AdMos Read More »
Download data from the sensors To download the data from the device, you can do it sensor by sensor or using a docking. Below we will explain how to download the data sensor by sensor.To know how to download data with a docking station, please read section How to Sync and charge AdMos sensors with
How to Download Data from AdMos sensor Read More »
Sensor configuration To configure your device, you need to follow the below steps: Plug your device to your computer using the USB cable provided with the device. Once your device is recognised by your computer, the below message will appear at the bottom right of your screen.By clicking on the message, Insiders website will be opened
How to configure an AdMos sensor Read More »
Before the Session Before starting to use the device, you must activate it by taking its ownership. For more information, please read the section How To Activate Your AdMos. Make sure to configure the device, prior to the session, with the options needed. For more information, please read the How To Configure an AdMos sensor.
LED lights table The below table explains in detail the meaning of both LED lights colours and statuses. LED light status Device status – LED 1 Network status – LED 2 Battery charge complete Start-up / config Battery charging Searching network Starting / sensors initialization Connected to network, connecting to server Recording in progress Connected
LED lights behaviour on AdMosLive V1 Read More »
Charging the AdMosLive AdMosLive has an autonomy ranging from 5 to 10 hours depending on the configuration.A full battery recharge can take up to 1,5 hour. When your device will need to be charged, the LED light will start blinking red. Note: we recommend to charge the device some hours before using it. Do not
How to charge the AdMosLive V1 Read More »
Take the ownership To activate the device, you need to take its ownership by following the below steps: Plug your device to your computer using the USB cable provided with the device Once your device is recognised by your computer, the below message will appear at the bottom right of your screen. If you click
How to Activate your AdMosLive V1 Read More »