How to Update an AdMos sensor (without docking station)

AdMos_rendering

Update with the Updater tool

If you do not have a docking station or if you would like to update a single sensor at the time, the update can be launched manually using the Updater tool. Note: Currently, the Updater works only on Windows computers.

  1. First download the Updater tool
  2. Extract all the content of the “updaterXYZ.zip” file you downloaded previously
    Note: To extract the content of a ZIP file, you can download 7-Zip. It is a free software with open source
  3. Once all the content is extracted from the ZIP file, open the folder “updater”
    Warning: It is not possible to run the updater from the ZIP file. You must extract all the content of the ZIP file first. Otherwise, the updater will not work
  4. Then double click on “Updater.bat” to run the Updater tool
  5. Windows Security might display the following messages
  6. Click on “More info”
  7. Then click on “Run anyway”
  8. Windows might ask you if you want to allow this application, please click “Yes”
  9. Now the Updater tool is launched
  10. Connect the sensor to your computer with the USB cable
  11. A pop-up at the bottom right of your screen will show the sensor is connected
  12. On the Updater tool, the green dot confirms that the sensor is connected.
  13. Press the “Update Sensor” button
  14. While updating, a progress circle will be displayed
  15. Warning: do not unplug the sensor while the update is in progress, otherwise an error message will be displayed. In that case, you have to restart the update procedure
  16. When the update is completed, a pop-up confirmation will be displayed
  17. Once the sensor is updated, you can close the Updater tool, unplug the sensor and start using it

/!\ In case of error, please close the updater tool and relaunch it. If the issue remains, please contact the support.

Scroll to Top