Angel

Note: this procedure works with version 3.9 and higher. If it is not the case yet, please update it with this procedure: docking update. This will erase the docking’s content so be sure to contact support before performing the procedure. Power down the docking station. Make sure there is no sensor connected. Download the .txt […]

Note: this procedure will update your docking to the version 3.11 Warning: prior to update the docking, ensure you have retrieve the backup data. The update process erases all data present in the docking. Download the “docking.zip” from this link: Docking firmware.NOTE: Mac user should recreate the archive as the system automatically extract it when

Update the Sensors Warning: prior to update a device, ensure you have retrieve all data. The update process erases all data present in the device. Download the “app.zip” from this link: sensors firmware. Copy it on the provided USB key without unzipping the file. Make sure that the file is named “app.zip“. Make sure all

Data Synchronization Note : Once the synchronization is done, the datas are automatically deleted from the sensors. So be sure you have saved the data on the provide USB Key as mentioned below. Connect all your sensors to the docking station before powering it up. Power up the docking station. Wait until the docking boots

Before the Game Before starting to use the device, you must activate it by taking its ownership. For more information, please read the section How To Activate Your FieldWiz V2. Make sure you have configured your sensor with a player. See related section for more information. First, turn on the sensor by pressing the button.

The Firmware is the piece of software that manages the device behavior. At Insiders we are constantly improving our devices and are often releasing new Firmware upgrades. The following documentation shows you how to check the Firmware version of your device and upgrade it to the latest version. Verify the version of your Sensor Connect

Clearing data It is recommended to clear the data once the information is recovered in order to optimize the next synchronization and data upload. Connect the Pod to a computer with an USB cable. Delete the .FWZ file, e.g. 01.FWZ Eject the Pod. You can now disconnect the USB cable. This operation is irreversible.

Clear the Data It is recommended to clear the data once the information is recovered in order to optimize the next synchronization and data upload. Power up the docking station. Once the blue LED is on, press the two buttons simultaneously for 2 seconds. The operation takes ~30 seconds. Once finished, it emits a beep

Before the Game Turn on the pod by pressing the button for 1 second until the green LED starts. Turned ON, the Pod will search for a GPS signal. It takes max. 2 minutes. The LED blinks slowly during this time. Once operational, the LED blinks rapidlyand the analysis begins. It is required for the

Before the Game Turn on the pod by pressing the button for 1 second until the green LED starts. It is required for the proper functioning of the device to check its position on each player and that the LED is pulsing (In the right position you can read the number and see the LED