4G LTE-M Coverage Zone A Networks Zone A Networks 2G Sunsets 4G LTE-M Coverage The following list shows the available 4G LTE-M operators by country / region. The “Insiders Validation” column indicates the results of our tests on site during our travels. Last update: AFRICA Country & Region Network LTE-M Coverage Algeria ATM Mobilis expected
LED lights table The below table explains in detail the meaning of both LED lights colours and statuses. LED light status Device status – LED 1 Network status – LED 2 Battery charge complete Start-up / config Battery charging Searching network Starting / Sensors initialization / DFU firmware update in progress Connected to network, connecting
LED lights behaviour on INTENSE Read More »
Automatic update over the air INTENSE sensors are automatically updated over the air (OTA) by Insiders. Therefore, you do not need to do anything, just use the sensors as usual. While using INTENSE sensors for a sport session, the OTA update process will start automatically if needed. Then, the sensors will have the latest version
How to Update an INTENSE sensor Read More »
Charging the INTENSE INTENSE has an autonomy ranging from 5 to 10 hours depending on the configuration.A full battery recharge can take up to 1,5 hour. When your device will need to be charged, the LED light will start blinking red. Note: we recommend to charge the device some hours before using it. Do not
How to charge the INTENSE Read More »
Take the ownership To activate the device, you need to take its ownership by following the below steps: Plug your device to your computer using the USB cable provided with the device Once your device is recognised by your computer, the below message will appear at the bottom right of your screen. If you click
How to Activate your INTENSE Read More »
Before the Session Make sure to activate the device, prior to the first use, by taking its ownership. For more information, please read the section How To Activate Your INTENSE. First, turn on the sensor by pressing the power button once. The LED light will turn on green Wait until both LED lights, and ,
Quick Start INTENSE Read More »
LED lights table The below table explain in detail the meaning of both LED lights colours and status. LED light colour Blinking speed Device status Slow Synchronising with GPS signal and measuring heart rate with the WizShirt Fast Synchronised and ready to use with the WizShirt Slow The sensor is charging Steady ON The sensor
LED lights behaviour on INSPIRIT Read More »
Note: this procedure works with version 3.9 and higher. If it is not the case yet, please update it with this procedure: docking update. This will erase the docking’s content so be sure to contact support before performing the procedure. Power down the docking station. Make sure there is no sensor connected. Download the .txt
Support : Generate docking’s data backup – INSPIRIT Read More »
Warning: this procedure only applies to dockings badged with “Insiders”. Note: this procedure will update your docking to the version 3.12. No Update available yet. Warning: prior to update the docking, ensure you have retrieve the backup data. The update process erases all data present in the docking. Download the “docking.zip” from this link: Docking
How to Update an INSPIRIT Insiders Docking Station Read More »
Download data from the sensors To download the data from the device, you can do it sensor by sensor or with the Hub or with a docking. Important note : To know how to download data directly from your devices to your favorite Data Scientists management platform, please contact directly the support of your Data
How to Download Data from an INSPIRIT without Docking station Read More »