Intense

LED lights table The below table explains in detail the meaning of both LED lights colours and statuses. LED light status Device status – LED 1 Network status – LED 2 Battery charge complete Start-up / config Battery charging Searching network Starting / Sensors initialization / DFU firmware update in progress Connected to network, connecting

Automatic update over the air INTENSE sensors are automatically updated over the air (OTA) by Insiders. Therefore, you do not need to do anything, just use the sensors as usual. While using INTENSE sensors for a sport session, the OTA update process will start automatically if needed. Then, the sensors will have the latest version

Charging the INTENSE INTENSE has an autonomy ranging from 5 to 10 hours depending on the configuration.A full battery recharge can take up to 1,5 hour.  When your device will need to be charged, the LED light will start blinking red. Note: we recommend to charge the device some hours before using it. Do not

Take the ownership To activate the device, you need to take its ownership by following the below steps: Plug your device to your computer using the USB cable provided with the device Once your device is recognised by your computer, the below message will appear at the bottom right of your screen. If you click

Before the Session Make sure to activate the device, prior to the first use, by taking its ownership. For more information, please read the section How To Activate Your INTENSE. First, turn on the sensor by pressing the power button once. The LED light will turn on green Wait until both LED lights, and ,