AdMos

Update with the Updater tool If you do not have a docking station or if you would like to update a single sensor at the time, the update can be launched manually using the Updater tool. Note: Currently, the Updater works only on Windows computers. First download the Updater tool Extract all the content of the “updaterXYZ.zip” […]

Take the ownership To activate the device, you need to take its ownership by following the below steps: Plug your device to your computer using the USB cable provided with the device Once your device is recognised by your computer, the below message will appear at the bottom right of your screen. If you click

Note: this procedure works with version 3.9 and higher. If it is not the case yet, please update it with this procedure: docking update. This will erase the docking’s content so be sure to contact support before performing the procedure. Power down the docking station. Make sure there is no sensor connected. Download the .txt

Note: this procedure will update your docking to the version 3.11 Download the “docking.zip” from this link: Docking firmware. NOTE: Mac user should recreate the archive as the system automatically extract it when download. Copy it on the *provided USB key without unzipping the file. Make sure there is no sensor connected. Connect the *provided

Update the Sensors Download the “app.zip” from this link: sensors firmware. Copy it on the provided USB key without unzipping the file. Make sure that the file is named “app.zip“. Make sure all sensors are connected to the docking before powering it up. Connect the provided USB key on the docking. Power up the docking

Charge the sensors To charge the AsMos sensor, you can use the USB cable if you need to charge only one sensor at the time. Or you can charge multiple sensors at the same time using a docking station. Below we will explain how to charge one sensor with the USB cable.To know how to

Data Synchronization Note : Once the synchronization is done, the datas are automatically deleted from the sensors. So be sure you have saved the data on the provide USB Key as mentioned below. Connect all your sensors to the docking station before powering it up. Power up the docking station. Wait until the docking boots

LED lights table The below table explain in detail the meaning of both LED lights colours and status. LED light colour Blinking speed Device status Slow Synchronising with GPS signal and measuring heart rate with the Wiz Shirt Fast Synchronised and ready to use with the Wiz Shirt Slow The sensor is charging Steady ON

Download data from the sensors To download the data from the device, you can do it sensor by sensor or using a docking. Below we will explain how to download the data sensor by sensor.To know how to download data with a docking station, please read section How to Sync and charge AdMos sensors with

Sensor configuration To configure your device, you need to follow the below steps: Plug your device to your computer using the USB cable provided with the device. Once your device is recognised by your computer, the below message will appear at the bottom right of your screen.By clicking on the message, Insiders website will be opened