Infinity

This article summarizes the changes for each firmware release. For instructions on installing a firmware update to your device, view the following articles: How To Update The INFINITY Version Table Versions are displayed from newest to oldest. 1.0.0   –   15.09.2026 Initial release for INFINITY

LED lights table The below table explains in detail the meaning of LED lights colours and statuses.   LED lights status Description Device status Steady Violet Start-up / config / Starting / Sensors initialization / DFU firmware update in progress Breathing Violet Searching network / GNSS Circle Violet Connected to network / connecting to server / Recording in progress / Connected to server / sending data to server Circle Red Shutting down Blinking Blue Battery charging Steady Green Battery charge complete Steady Red Low battery   Steady Red Network error / Memory full / Other hardware issue Gradually Red Battery level below 20% Blinking Multicolor OTA modem update in progress

Charging the INFINITY INFINITY has an autonomy of 15 hours in the default configuration.A full battery recharge can take up to 2 hours when using the docking station. Note: we recommend to charge the device some hours before using it. Do not leave it charging all the time.If the device was not used for some months, a full charge could take longer than usual. In this case, set it on charge 24h before using it again. With magnetic USB cable To charge your INFINITY, use the magnetic USB cable provided with your device Connect the USB cable to a USB power adaptor or directly to your computer Then connect the

Automatic update over the air More details coming soon. INFINITY devices are automatically updated over the air (OTA) by Insiders. Therefore, you do not need to do anything, just use the devices as usual. While using INFINITY devices for a sport session, the OTA update process will start automatically if needed. Then, the devices will have the latest version for the next time. For your information, find below how the OTA update is automatically launched: Before your sport session, turn on the device by pressing the power button once The device starts and the LED lights behave normally until they “turn in circle” in violet. You can start your sport

Before the Session Make sure to activate the device, prior to the first use, by taking its ownership. For more information, please read the section How To Activate Your INFINITY. First, turn on the sensor by pressing the power button once. The LED lights will turn on steady violet for some seconds Then LED lights will start blinking violet in a “breathing” mode Wait until LED lights are blinking violet in a “circle” mode Your INFINITY device is ready to be used