Charging the INFINITY
INFINITY has an autonomy of 15 hours in the default configuration.
A full battery recharge can take up to 2 hours when using the docking station.
Note: we recommend to charge the device some hours before using it. Do not leave it charging all the time.
If the device was not used for some months, a full charge could take longer than usual. In this case, set it on charge 24h before using it again.
With magnetic USB cable
- To charge your INFINITY, use the magnetic USB cable provided with your device
- Connect the USB cable to a USB power adaptor or directly to your computer
- Then connect the magnetic connector to your INFINITY. The LED lights will turn violet for a few seconds
- The LED lights will then start blinking blue
- Once your INFINITY is fully charged, the LED lights will turn steady green
- You can now disconnect the USB cable from you device
- Your INFINITY is now ready to be use!
With Docking station
- Insert your devices into the docking station slots
- Connect the docking station to the provided power supply
- The LED lights will turn violet for a few seconds
- The LED lights will then start blinking blue
- Once your devices are fully charged, the LED lights will turn steady green
- You can now disconnect the power supply from the docking station
- Your devices are now ready to be use!
