Sensor details To get your device details, you need to follow the below steps: Plug your device to your computer using the USB cable provided with the device. Once your device is recognised by your computer, the below message will appear at the bottom right of your screen.By clicking on the message, Insiders website will […]
Comment obtenir les détails du FieldWiz V2 Lire la suite »
Sensor details To get your device details, you need to follow the below steps: Plug your device to your computer using the USB cable provided with the device. Once your device is recognised by your computer, the below message will appear at the bottom right of your screen.By clicking on the message, Insiders website will
Comment obtenir les détails du INSPIRIT Lire la suite »
Download data from the sensors with the Hub To download the data from the device, you can do it with the Hub or sensor by sensor or with a docking. Important note : To know how to download data directly from your devices to your favorite Data Scientists management platform, please contact directly the support
Télécharger les données et charger les capteurs avec le Hub Lire la suite »
This article summarizes the changes for each firmware release. For instructions on installing a firmware update to your device, view the following articles: How To Update An INTENSE Sensor Version Table Versions are displayed from newest to oldest. 3.1.2 – 11.07.2023 Initial release for INTENSE V1
Firmware Release Note INTENSE V1 Lire la suite »
4G LTE-M Coverage Zone A Networks 2G Sunsets 4G LTE-M Coverage The following list shows the available 4G LTE-M operators by country. The “Insiders Validation” column indicates the results of our tests on site during our travels. AFRICA Country Network LTE-M Coverage Algeria ATM Mobilis expected Mauritius Mahanagar (MTML) expected Mayotte / Reunion Orange expected
Couverture Réseau Lire la suite »
LED lights table The below table explains in detail the meaning of both LED lights colours and statuses. LED light status Device status – LED 1 Network status – LED 2 Battery charge complete Start-up / config Battery charging Searching network Starting / Sensors initialization / DFU firmware update in progress Connected to network, connecting
Comportement des voyants LED sur INTENSE Lire la suite »
Automatic update over the air INTENSE sensors are automatically updated over the air (OTA) by Insiders. Therefore, you do not need to do anything, just use the sensors as usual. While using INTENSE sensors for a sport session, the OTA update process will start automatically if needed. Then, the sensors will have the latest version
Comment mettre à jour un INTENSE Lire la suite »
Charging the INTENSE INTENSE has an autonomy ranging from 5 to 10 hours depending on the configuration.A full battery recharge can take up to 1,5 hour. When your device will need to be charged, the LED light will start blinking red. Note: we recommend to charge the device some hours before using it. Do not
Comment charger l'INTENSE Lire la suite »
Take the ownership To activate the device, you need to take its ownership by following the below steps: Plug your device to your computer using the USB cable provided with the device Once your device is recognised by your computer, the below message will appear at the bottom right of your screen. If you click
Comment Activer Votre INTENSE Lire la suite »
Before the Session Make sure to activate the device, prior to the first use, by taking its ownership. For more information, please read the section How To Activate Your INTENSE. First, turn on the sensor by pressing the power button once. The LED light will turn on green Wait until both LED lights, and ,
Démarrage rapide INTENSE Lire la suite »