Angel

Charge the sensors To charge the AsMos sensor, you can use the USB cable if you need to charge only one sensor at the time. Or you can charge multiple sensors at the same time using a docking station. Below we will explain how to charge one sensor with the USB cable.To know how to charge multiple sensors at the same time with a docking station, please read section How to Sync and charge AdMos sensors with a the docking station. Plug your device to your computer or to an USB power supplier using the USB cable provided with the device. Once your device is connected, the LED light will […]

Data Synchronization Note : Once the synchronization is done, the datas are automatically deleted from the sensors. So be sure you have saved the data on the provide USB Key as mentioned below. Connect all your sensors to the docking station before powering it up. Power up the docking station. Wait until the docking boots up (take around 30 seconds) The docking will automatically start the synchronization of the sensors. Once synchronized, the sensor’s icons become green. When all sensors are synchronized, plug the provided USB key on the back of the docking. The following screen will appear to confirm all datas have been saved on the provided USB key.

LED lights table The below table explain in detail the meaning of both LED lights colours and status. LED light colour Blinking speed Device status Slow Synchronising with GPS signal and measuring heart rate with the Wiz Shirt Fast Synchronised and ready to use with the Wiz Shirt Slow The sensor is charging Steady ON The sensor is fully charged Slow / Fast / Steady It needs to be updated to latest Firmware version.If the LED is still red after updating, the device has an issue. Note Blinking LED light Steady LED light

Download data from the sensors To download the data from the device, you can do it sensor by sensor or using a docking. Below we will explain how to download the data sensor by sensor.To know how to download data with a docking station, please read section How to Sync and charge AdMos sensors with the docking station. Plug your device to your computer using the USB cable provided with the device. Once your device is recognised by your computer, the below message will appear at the bottom right of your screen.By clicking on the message, Insiders website will be opened in your default browser. Open the Raw page. Then, click

Sensor configuration To configure your device, you need to follow the below steps: Plug your device to your computer using the USB cable provided with the device. Once your device is recognised by your computer, the below message will appear at the bottom right of your screen.By clicking on the message, Insiders website will be opened in your default browser. Open the Raw page. Then, click on “Connect” (1) Under your browser’s address field, a list will be displayed. Find the AdMos device and select it (2), then click on “Connect” (3). Sensor’s details (4) and configuration (5) will be loaded automatically. You will then be allowed to change its configuration. Activate

Before the Session Before starting to use the device, you must activate it by taking its ownership. For more information, please read the section How To Activate Your AdMos. Make sure to configure the device, prior to the session, with the options needed. For more information, please read the How To Configure an AdMos sensor. First, turn on the sensor by pressing once the power button. The LED light will start blinking. Note: the LED light colour and blinking speed define the state of the sensor.  Using the sensor without the Wiz Shirt: The LED light starts blinking slowly in red, while the device starts synchronising with the GPS signal.