Angel

Note: this procedure works with version 3.9 and higher. If it is not the case yet, please update it with this procedure: docking update. This will erase the docking’s content so be sure to contact support before performing the procedure. Power down the docking station. Make sure there is no sensor connected. Download the .txt file with this link: click here for download. Then place it in the USB key. 4. Connect the provided* USB key on the docking before powering it up.*not using the provided USB key might make the update fail.5. Power up the docking station. 6. Wait until the docking boots up (take around 30 seconds) 7.

Warning: this procedure only applies to dockings badged with “asi.swiss”. Note:  this procedure will update your docking to the version 3.11 Warning: prior to update the docking, ensure you have retrieve the backup data. The update process erases all data present in the docking. Download the “docking.zip” from this link: Docking firmware.NOTE: Mac user should recreate the archive as the system automatically extract it when download. Copy it on the *provided USB key without unzipping the file. Make sure there is no sensor connected. Connect the *provided USB key on the docking before powering it up. Power up the docking Wait until the docking boots up. The docking will look

Update the Sensors Warning: prior to update a device, ensure you have retrieve all data. The update process erases all data present in the device. Download the “app.zip” from this link: sensors firmware. Copy it on the provided USB key without unzipping the file. Make sure the file is named “app.zip“!!! /! Remove brackets and numbers if present. /! If the file extension “.zip” is missing, there is two options : You are using a Windows PC: it is likely that in your personal settings the extension of known file types are hidden. This doesn’t affect the devices update process. You can continue the update process. You are using a MAC: ZIP

Data Synchronization Note : Once the synchronization is done, the datas are automatically deleted from the sensors. So be sure you have saved the data on the provide USB Key as mentioned below. Connect all your sensors to the docking station before powering it up. Power up the docking station. Wait until the docking boots up (take around 30 seconds) The docking will automatically start the synchronization of the sensors. Once synchronized, the sensor’s icons become green. When all sensors are synchronized, the following image will be displayed on the screen. Only then, plug the provided USB key on the back of the docking. The following screen will appear to

Before the Game Before starting to use the device, you must activate it by taking its ownership. For more information, please read the section How To Activate Your FieldWiz V2. Make sure you have configured your sensor with a player. See related section for more information. First, turn on the sensor by pressing the button. The LED will start blinking green slowly. Let it finds the GPS signal until the LED starts blinking green faster.This operation should take up to 2 minutes maximum. It is required for the proper functioning of the device to check its position on each player and that the LED is ON (In the right position

The Firmware is the piece of software that manages the device behavior. At Insiders we are constantly improving our devices and are often releasing new Firmware upgrades. The following documentation shows you how to check the Firmware version of your device and upgrade it to the latest version. Verify the version of your Sensor Connect the Pod to a computer with an USB cable.   Open the file “config.txt”.   Check the Version (e.g. B0 in the above example). The actual version is: C2 If your Pod is not at the latest version, proceed with the upgrade. Upgrade the Sensor individually IMPORTANT NOTE: The Firmware upgrade of your device might