Update with the Updater tool Advanced Mode
If you do not have a docking station or if you would like to update a single sensor at the time, the update can be launched manually using the Updater tool.
- First download the Updater tool
- Extract all the content of the “updater.zip” file you downloaded previously
Note: To extract the content of a ZIP file, you can download 7-Zip. It is a free software with open source - Once all the content is extracted from the ZIP file, open the folder “updater”
Warning: It is not possible to run the updater from the ZIP file. You must extract all the content of the ZIP file first. Otherwise, the updater will not work - Then double click on “Updater.bat” to run the Updater tool
- Windows Security might display the following messages
- Click on “More info”
- Then click on “Run anyway”
- Windows might ask you if you want to allow this application, please click “Yes”
- Now the Updater tool is launched
- Download the “app.zip” from the link provided by our support team
- On the menu bar, click on “Settings“, and then select “Advanced mode“
Note: If the “Advanced mode” is not available, click on “File” and then select “Open“
- On this new window, select the “app.zip” file you uploaded previously and press “Open”
- Now you can see that you are in the Advanced mode at the file you selected
- Connect the sensor to your computer with the USB cable
- A pop-up at the bottom right of your screen will show the sensor is connected
- On the Updater tool, the green dot confirms that the sensor is connected.
- You can now press the “Update Sensor” button
- While updating, a progress circle will be displayed
- Warning: do not unplug the sensor while the update is in progress, otherwise an error message will be displayed. In that case, you have to restart the update procedure
- When the update is completed, a pop-up confirmation will be displayed
- Once the sensor is updated, you can close the Updater tool, unplug the sensor and start using it