Update the Sensors
Warning: prior to update a device, ensure you have retrieve all data. The update process erases all data present in the device.
- Download the “app.zip” from this link: sensors firmware.
- Copy it on the provided USB key without unzipping the file. Make sure that the file is named “app.zip“.
- Make sure all sensors are connected to the docking before powering it up.
- Connect the provided USB key on the docking.
- Power up the docking.
- Wait until the docking boots up.
- The docking will detect the file and proceed to the sensor’s update.
- The sensor’s LED will turn green for a moment and the sensor’s icon on the docking screen will fill up in pink.
- Once the update is done, the sensor and its icon will go back to the charging mode.
- Power down the docking.
- Unplug the provided USB key and erase the “app.zip” file to use it normally.