Inspirit

LED lights table The below table explain in detail the meaning of both LED lights colours and status. LED light colour Blinking speed Device status Slow Synchronising with GPS signal and measuring heart rate with the WizShirt Fast Synchronised and ready to use with the WizShirt Slow The sensor is charging Steady ON The sensor is fully charged Slow / Fast / Steady It needs to be updated to latest Firmware version.If the LED is still red after updating, the device has an issue. Note Blinking LED light Steady LED light

Note: this procedure works with version 3.9 and higher. If it is not the case yet, please update it with this procedure: docking update. This will erase the docking’s content so be sure to contact support before performing the procedure. Power down the docking station. Make sure there is no sensor connected. Download the .txt file with this link: click here for download. Then place it in the USB key. Connect the provided* USB key on the docking before powering it up.*not using the provided USB key might make the update fail. Power up the docking station. Wait until the docking boots up (take around 30 seconds) The docking will

Note: this procedure will update your docking to the version 3.11 Warning: prior to update the docking, ensure you have retrieve the backup data. The update process erases all data present in the docking. Download the “docking.zip” from this link: Docking firmware. No Update available yet. NOTE: Mac users should recreate the archive as the system automatically extract it when download. Copy it on the *provided USB key without unzipping the file. Make sure there is no sensor connected. Connect the *provided USB key on the docking before powering it up. Power up the docking Wait until the docking boots up. The docking will look for an update. Once the

Download data from the sensors To download the data from the device, you can do it sensor by sensor or with the Hub or with a docking. Below we will explain how to download the data sensor by sensor. To know how to download data with a docking station, please read section How to Sync and charge with docking station. To know how to download data with a Hub, please read section How to Sync and charge with docking station.   Plug your device to your computer using the USB cable provided with the device. Once your device is recognized by your computer, the below message will appear at the

Sensor configuration To configure your device, you need to follow the below steps: Plug your device to your computer using the USB cable provided with the device. Once your device is recognised by your computer, the below message will appear at the bottom right of your screen.By clicking on the message, Insiders website will be opened in your default browser. Open the Raw page. Then, click on “Connect” (1) Under your browser’s address field, a list will be displayed. Find the device and select it (2), then click on “Connect” (3). Sensor’s details (4) and configuration (5) will be loaded automatically. You will then be allowed to change its configuration. Activate (checked)

Update with the Updater tool Warning: prior to update a device, ensure you have retrieve all data. The update process erases all data present in the device. If you do not have a docking station or if you would like to update a single sensor at the time, the update can be launched manually using the Updater tool. Note: Currently, the Updater works only on Windows computers. First download the Updater tool Extract all the content of the “updaterXYZ.zip” file you downloaded previouslyNote: To extract the content of a ZIP file, you can download 7-Zip. It is a free software with open source Once all the content is extracted from the ZIP

Update the Sensors Warning: prior to update a device, ensure you have retrieve all data. The update process erases all data present in the device. Download the “app.zip” from this link: sensors firmware. Copy it on the provided USB key without unzipping the file. Make sure the file is named “app.zip“!!! /! Remove brackets and numbers if present. /! If the file extension “.zip” is missing, there is two options : You are using a Windows PC: it is likely that in your personal settings the extension of known file types are hidden. This doesn’t affect the devices update process. You can continue the update process. You are using a

Data Synchronization Note : Once the synchronization is done, data are automatically deleted from the sensors. So be sure you have saved the data on the provide USB Key as mentioned below. Connect all your sensors to the docking station before powering it up. Power up the docking station. Wait until the docking boots up (take around 30 seconds) The docking will automatically start the synchronization of the sensors. Once synchronized, the sensor’s icons become green. When all sensors are synchronized, plug the provided USB key on the back of the docking. The following image will appear on the screen to confirm all datas have been saved on the provided

Take the ownership To activate the device, you need to take its ownership by following the below steps: Plug your device to your computer using the USB cable provided with the device Once your device is recognised by your computer, the below message will appear at the bottom right of your screen. If you click on this message, Insiders website will be opened in your default browser Open the API Device’s Activation page Enter your Manager account credentialsNote: if you do not a Manager account yet, please click on the link “Create an account” at the bottom of the login page and fill the form. In case of issue, please

Before the Game Before starting to use the device, you must activate it by taking its ownership. For more information, please read the section How To Activate Your INSPIRIT. Make sure you have configured your sensor with a player. See related section for more information. First, turn on the sensor by pressing the button. The LED will start blinking slowly. Let it finds the GPS signal until the LED starts blinking faster.This operation should take up to 2 minutes maximum. It is required for the proper functioning of the device to check its position on each player and that the LED is ON (In the right position you can read