FieldWiz V1

The Firmware is the piece of software that manages the device behavior. At Insiders we are constantly improving our devices and are often releasing new Firmware upgrades. The following documentation shows you how to check the Firmware version of your device and upgrade it to the latest version. Verify the version of your Sensor Connect […]

Clearing data It is recommended to clear the data once the information is recovered in order to optimize the next synchronization and data upload. Connect the Pod to a computer with an USB cable. Delete the .FWZ file, e.g. 01.FWZ Eject the Pod. You can now disconnect the USB cable. This operation is irreversible.

Clear the Data It is recommended to clear the data once the information is recovered in order to optimize the next synchronization and data upload. Power up the docking station. Once the blue LED is on, press the two buttons simultaneously for 2 seconds. The operation takes ~30 seconds. Once finished, it emits a beep

Before the Game Turn on the pod by pressing the button for 1 second until the green LED starts. Turned ON, the Pod will search for a GPS signal. It takes max. 2 minutes. The LED blinks slowly during this time. Once operational, the LED blinks rapidlyand the analysis begins. It is required for the

Before the Game Turn on the pod by pressing the button for 1 second until the green LED starts. It is required for the proper functioning of the device to check its position on each player and that the LED is pulsing (In the right position you can read the number and see the LED