FieldWiz V2

Data Synchronization Note : Once the synchronization is done, the datas are automatically deleted from the sensors. So be sure you have saved the data on the provide USB Key as mentioned below. Connect all your sensors to the docking station before powering it up. Power up the docking station. Wait until the docking boots up (take around 30 seconds) The docking will automatically start the synchronization of the sensors. Once synchronized, the sensor’s icons become green. When all sensors are synchronized, the following image will be displayed on the screen. Only then, plug the provided USB key on the back of the docking. The following screen will appear to […]

Before the Game Before starting to use the device, you must activate it by taking its ownership. For more information, please read the section How To Activate Your FieldWiz V2. Make sure you have configured your sensor with a player. See related section for more information. First, turn on the sensor by pressing the button. The LED will start blinking green slowly. Let it finds the GPS signal until the LED starts blinking green faster.This operation should take up to 2 minutes maximum. It is required for the proper functioning of the device to check its position on each player and that the LED is ON (In the right position