AdMosLive

Automatic update over the air AdMosLive sensors are automatically updated over the air (OTA) by Insiders. Therefore, you do not need to do anything, just use the sensors as usual. While using AdMosLive sensors for a sport session, the OTA update process will start automatically if needed. Then, the sensors will have the latest version for the next time. For your information, find below how the OTA update is automatically launched: Before your sport session, turn on the sensor by pressing the power button once Both LED lights,  and , will be blinking green alternately when fully connected. You can start your sport session While connected, the sensor will communicate with the

LED lights table The below table explains in detail the meaning of both LED lights colours and statuses. LED light status Device status – LED 1 Network status – LED 2 Battery charge complete Start-up / config Battery charging Searching network Starting / sensors initialization Connected to network, connecting to server Recording in progress Connected to server, sending data to server Low battery / DFU update in progress OTA update in progress Shutdown / Memory full / Other hardware issue Network error Note Blinking LED light Steady LED light

Charging the AdMosLive AdMosLive has an autonomy ranging from 5 to 10 hours depending on the configuration.A full battery recharge can take up to 1,5 hour.  When your device will need to be charged, the LED light will start blinking red. Note: we recommend to charge the device some hours before using it. Do not leave it charging all the time.If the device was not used for some months, a full charge could take longueur than usual. In this case, set it on charge 24h before using it again. With magnetic USB cable To charge your AdMosLive, use the magnetic USB cable provided with the device Plug the USB cable

Take the ownership To activate the device, you need to take its ownership by following the below steps: Plug your device to your computer using the USB cable provided with the device Once your device is recognised by your computer, the below message will appear at the bottom right of your screen. If you click on this message, Insiders website will be opened in your default browser Open the API Device’s Activation page Enter the credentials of your Manager accountNote: if you don’t have a Manager account, please ask the sport analytics platform to create one for you In the field called “Serial number of device” (1), enter the Serial

Before the Session Make sure to activate the device, prior to the first use, by taking its ownership. For more information, please read the section How To Activate Your AdMosLive. First, turn on the sensor by pressing the power button once. The LED light will turn on green Wait until both LED lights, and , are blinking green alternately Your AdMosLive sensor is ready to be used