Before the Session
Before starting to use the device, you must activate it by taking its ownership. For more information, please read the section How To Activate Your AdMos.
Make sure to configure the device, prior to the session, with the options needed. For more information, please read the How To Configure an AdMos sensor.
First, turn on the sensor by pressing once the power button. The LED light will start blinking.
Note: the LED light colour and blinking speed define the state of the sensor.
Using the sensor without the Wiz Shirt:
- The LED light starts blinking slowly in red, while the device starts synchronising with the GPS signal.
- Once the GPS synchronisation is done, the LED light will blink faster in red.
- Your AdMos is ready to be used.
Using the sensor with the Wiz Shirt:
- The LED light start blinking slowly in green, while the device starts synchronising with the GPS signal and measuring heart rate with the Wiz Shirt.
- Once the GPS synchronisation is done and the device is ready to be use with the Wiz Shirt, the LED light will blink faster in green.
- Your AdMos is ready to be used with the Wiz Shirt.
For more details about the LED lights colours and status signification, please read the LED lights colours and status signification.
After the Session
- Turn off the sensor by pressing shortly three times on the power button.
- The LED light will turn off.
Note: To get the data, you will need to download it after the game. Please read the section How to Download data from the sensors.