Charging the AdMosLive
AdMosLive has an autonomy ranging from 5 to 10 hours depending on the configuration.
A full battery recharge can take up to 1,5 hour.
When your device will need to be charged, the LED light 
will start blinking red.
Note: we recommend to charge the device some hours before using it. Do not leave it charging all the time.
If the device was not used for some months, a full charge could take longueur than usual. In this case, set it on charge 24h before using it again.
With magnetic USB cable
- To charge your AdMosLive, use the magnetic USB cable provided with the device
- Plug the USB cable to an USB power adaptor or even to your computer
- Then plug the cable to your AdMoseLive. The LED light will start blinking blue
- Once the device is fully changed, the LED light become steady blue
- You can now unplug the USB cable from you device. The LED light will turn off
With Docking station
- Insert devices into the docking station slots
- Power the docking station with the provided power supply
